Вопрос: Не удается обновить / обновить ubuntu 18.04, когда появляется ошибка apt / dpkg


Я уже давно использовал ubuntu 18.04, и он работал нормально до сегодняшнего утра, когда я включил свой компьютер и использовал терминал для обновлений.

Это результат sudo apt upgrade

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  libuchardet0 lollypop-portal mpv phantomjs python3-bs4 python3-html5lib
  python3-lxml python3-pylast python3-pyxattr python3-webencodings rtmpdump
  youtube-dl
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
26 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up python3 (3.6.5-3ubuntu1) ...
running python rtupdate hooks for python3.6...
E: py3compile:183: cannot create directory /usr/share/hplip/ui5/__pycache__: FileNotFoundError(2, 'No such file or directory')
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/deviceuricombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr_ext.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabgrouptable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabnametable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/filetable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/loadpapergroupbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printernamecombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettings_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingstoolbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/queuesconf.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/readonlyradiobutton.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systemtray.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/ui_utils.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog_base.py'
error running python rtupdate hook hplip-data
dpkg: error processing package python3 (--configure):
 installed python3 package post-installation script subprocess returned error exit status 4
dpkg: dependency problems prevent configuration of update-notifier-common:
 update-notifier-common depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package update-notifier-common (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of idle:
 idle depends on python3 (>= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.

dpkg: error processing package idle (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python3-update-manager:
 python3-update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-update-manager (--configure):
 dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
                          No apport report written because the error message indicates its a followup error from a previous failure.
                                                    No apport report written because MaxReports is reached already
                                  dpkg: dependency problems prevent configuration of python3-dev:
 python3-dev depends on python3 (= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-dev (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of gnome-shell:
 gnome-shell depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package gnome-shell (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of netplan.io:
 netplan.io depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package netplan.io (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of nplan:
 nplan depends on netplan.io; however:
  Package netplan.io is not configured yet.

dpkg: error processing package nplan (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-notifier:
 update-notifier depends on update-notifier-common (= 3.192.1.3); however:
  Package update-notifier-common is not configured yet.

dpkg: error processing package update-notifier (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of unattended-upgrades:
 unattended-upgrades depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package unattended-upgrades (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of idle3:
 idle3 depends on python3 (>= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.
 idle3 depends on idle (>= 3.6.5-3ubuntu1); however:
  Package idle is not configured yet.

dpkg: error processing package idle3 (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-manager:
 update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
 update-manager depends on update-notifier; however:
  Package update-notifier is not configured yet.
 update-manager depends on policykit-1-gnome | polkit-kde-agent-1 | lxpolkit | lxqt-policykit | mate-polkit | polkit-1-auth-agent; however:
  Package policykit-1-gnome is not installed.
  Package polkit-kde-agent-1 is not installed.
  Package lxpolkit is not installed.
  Package lxqt-policykit is not installed.
  Package mate-polkit is not installed.
  Package polkit-1-auth-agent is not installed.
  Package gnome-shell which provides polkit-1-auth-agent is not configured yet.

dpkg: error processing package update-manager (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gnome-menus:
 gnome-menus depends on python3:any (>= 3.1~); however:
  Package python3 is not configured yet.

dpkg: error processing package gnome-menus (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-manager-core:
 update-manager-core depends on python3:any (>= 3.2~); however:
  Package python3 is not configured yet.
 update-manager-core depends on python3-update-manager (= 1:18.04.11.3); however:
  Package python3-update-manager is not configured yet.

dpkg: error processing package update-manager-core (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of gdm3:
 gdm3 depends on gnome-shell (>= 3.19.92); however:
  Package gnome-shell is not configured yet.

dpkg: error processing package gdm3 (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
dpkg: too many errors, stopping
No apport report written because MaxReports is reached already
                                                              Errors were encountered while processing:
 python3
 update-notifier-common
 idle
 python3-update-manager
 python3-dev
 gnome-shell
 netplan.io
 nplan
 update-notifier
 unattended-upgrades
 idle3
 update-manager
 gnome-menus
 update-manager-core
 gconf2
 gdm3
Processing was halted because there were too many errors.
E: Sub-process /usr/bin/dpkg returned an error code (1)

я нашел другое сообщение, но я не могу прокомментировать это, не задавая вопрос сам, поэтому вот моя проблема. помощь будет оценена. Я также побежал apt-cache policy hplip как было задано в другом посте и получил тот же результат.

]hplip:
  Installed: 3.17.10+repack0-5
  Candidate: 3.17.10+repack0-5
  Version table:
 *** 3.17.10+repack0-5 500
        500 http://in.archive.ubuntu.com/ubuntu bionic/main amd64 Packages
        100 /var/lib/dpkg/status

4
2017-07-17 05:49


Источник


Как вы установили HPLIP? - N0rbert
@ N0rbert Я установил его с официального сайта HP здесь: developers.hp.com/hp-linux-imaging-and-printing/gethplip  На самом деле я установил его несколько дней назад - pennywise666
Какое руководство вы использовали? Обычно deb-packaged и двоичные версии находятся в полном объёме. Поэтому вы должны удалить deb-пакеты hplip перед установкой бинарной версии. - N0rbert
@ N0rbert Я загрузил файл .run из ссылки Sourceforge, которую он предоставил. Так что это была двоичная версия. Я не думаю, что у меня уже был пакет deb до того, как я установил двоичную версию. - pennywise666
Кажется, что вы должны удалить сломанные hplip-data пакет с sudo apt-get purge hplip-data, - N0rbert


Ответы:


Обычно deb-packaged и двоичные версии конфликтуют. Поэтому вы должны удалить hplipсвязанных с пакетом deb-пакетов перед установкой двоичной версии.

Проблема заключается в установке HPLIP. Он неправильно удаляет Ubuntu-упакованную версию, удаляя файлы, которые поддерживаются диспетчером пакетов.

Они отмечают эту проблему на страница поддержки:

Предупреждение. Если вы обновляете HPLIP, а HPLIP уже настроен с дистрибутивом, или если вы установили HPLIP с использованием RPM, DEB или другого пакета, удалите предыдущую версию, используя метод, специфичный для вашего дистрибутива. Если вы этого не сделаете, у вас могут возникнуть проблемы с конфликтом пакетов или проблемы с функциональностью.

Было бы безопаснее повторно установить бинарный HPLIP, следуя руководству в моем другой ответ,


4
2017-07-17 12:12





Это проблема драйвера HPLIP. Загрузите его из https://developers.hp.com/hp-linux-imaging-and-printing, Сама ошибка говорит, что она ожидает /usr/share/hplip/ui5/* , Поэтому, пожалуйста, установите библиотеку в эту папку или установите в другое место и перейдите в указанную папку.


-1
2017-07-17 15:50